You are here


Confetti

Black AB10
The images shown and color representations are subject to your monitor quality and screen resolution settings. Physical samples are recommended and available through your local HON dealer.
Grade 1
Application: Chair Fabrics
Content: 100% Olefin
Width: 54”
Repeat: 0.5”V x 0.625”H
Weight: 12.96 ounces per linear yard
Abrasion: 50,000 double rubs (W)
Flame Resistance: NFPA 260 (UFAC Class 1), California TB 117-2013, Section 1 compliant, Compatible with California TB 133 (CAL 133) when ordered as a FC option
Maintenance Code: WS
Manufacturer: HNI
Fabric is readily available
ACT Registered Certification
Flammability

The measurement of a fabric's performance when it is exposed to specific sources of ignition.
Note: ACT guidelines specify different flammability tests dictated by the intended end use for the fabric.


Upholstery
California Technical Bulletin 117-2013 Section 1 – Pass


Wrapped Wall Panels and Upholstered Walls
ASTM E84 (Unadhered Mounting Method) – Class A or Class 1

Wet + Dry Crocking

Transfer of dye from the surface of a dyed or printed fabric onto another surface by rubbing.

Upholstery – Woven Fabrics
AATCC 8
Dry Crocking, Grade 4 minimum
Wet Crocking, Grade 3 minimum

Upholstery – Coated Fabrics
AATCC 8
Dry Crocking, Grade 4 minimum
Wet Crocking, Grade 4 minimum

Colorfastness to Light

A material’s degree of resistance to the fading effect of light.

Upholstery – Woven Fabrics
AATCC 16 Option 1 or 3
Grade 4 minimum at 40 hours*

Upholstery – Coated Fabrics
AATCC 16 Option 1 or 3
Grade 4 minimum at 200 hours*
Or
ASTM D4329
No appreciable color change at 150 hours*

Physical Properties

Key factors in assessing overall durability of a fabric vary depending on the fabric construction.

Upholstery – Woven Fabrics 
Pilling

ASTM D3511 (Brush Pill), Class 3 minimum Or ASTM D4970, (Martindale Tester), Class 3 minimum 

Breaking Strength
ASTM D5034 (Grab Test), 50 lbs. minimum in warp and weft

Seam Slippage
ASTM D4034, 25 lbs. minimum in warp and weft

Abrasion

The surface wear of a fabric caused by rubbing and contact with another fabric.

High Traffic /  Public Spaces – Woven Upholstery Fabrics
ASTM D4157 (ACT approved #10 Cotton Duck)
30,000 double rubs Wyzenbeek method
ASTM D4966 (12 KPa pressure)
40,000 cycles Martindale method

High Traffic /  Public Spaces – Coated Upholstery Fabrics
ASTM D4157 (ACT approved #10 Cotton Duck or Wire Screen)
50,000 double rubs Wyzenbeek method